Monitoring Report

ViGIE platform allows you to create monitoring reports with the information you want about the sensors in your organisation.

Monitoring reports can show the following information:

• Sensor parameter analysis: The graphical evolution of the selected sensor parameters for the selected time period is displayed, showing the average, minimum and maximum values registered.

It is possible to configure the appearance/disappearance of the alarm limits in the graph for a sensor parameter by enabling/disabling the Show alarm limits option in the report preview.

• Alarms: A set of quantitative information about the alarms of the selected sensors is displayed. If you select the Include Alarms Statistics option, the information shown in the image below will be displayed for each sensor parameter.

        If you select the Include Alarms details option, the report will show the following information for each triggered alarm:

• Tables: The summary tables show the average, maximum and minimum value recorded on each day of the selected time period. In the image below, you can see an example of the information that will appear in the report for each of the sensor parameters, if you select the option Tables when creating the report.

• Deactivation Periods / Events: If you want to obtain information in the report about the deactivation periods and events that occurred in each of the selected sensors, enable this option. The figure below shows an example of the information that will appear in the report if the Deactivation Periods/Events option is enabled when the report is generated.

Some of this information may be displayed or omitted from monitoring reports. 

Find out how to generate a monitoring report here.