To access data from a sensor you will need to access the Sensor View. This view allows you to access all the information related to the sensor, divided into four sections: Analysis, Alarms, General and Calibration.

There are two possible ways to access the Sensor View.

Option 1: Through the Locations and Equipment menu.

Step 1: In the main menu, on the left side, click Locations and Equipment.

Step 2: Choose the Locations option.

Step 3:  Find, in the organisational structure on your left hand side, the location that you want. Alternatively, enter the name of the location you are looking for in the search bar. 

Step 4: Select the location that contains the sensor. A list will open with all equipment and/or sensors in the selected location.

Step 5: To make it easier to locate the sensor you are looking for, you can apply the available filters. Select them and click Filter.

Step 6: Select the desired sensor. The Sensor View will open.

Otherwise, you can enter in the search bar the name of the sensor you want to see information about and select it. The Sensor View will open.

Example of the procedure:

Option 2: Through the dashboard sensors tab. (applicable if the desired sensor has been added to your dashboard sensors tab)

Step 1: In the main menu, on the left side, click Dashboard and select the dashboard that contains the desired sensor.

Step 2: Select the Sensors tab.

Step 3: Find the desired sensor and click on its widget. The Sensor View will open.

Example of the procedure:

Find out more about each of the Sensor View tabs:

How to use the Sensor Analysis tab?

How to use the Sensor Alarms tab? 

How to use the Sensor General tab?

How to use the Sensor Calibration tab?