There are two option to add a sensor to the sensors tab of your dashboard.

Option 1: Through the Sensor View.

Step 1: In the left side menu, click on Locations and Equipment.

Step 2: Choose the Locations option.

Step 3: Enter the name of your required sensor in the search field.

Step 4: Click on the desired sensor. The Sensor View will open.

Step 5: Add the sensor parameter(s) to favourites by clicking on the star located at the left of the parameter name.

Step 6: Choose which dashboard(s) you want to add the parameter and click Done. (applicable if you have more than one dashboard)

Example of the procedure:

Option 2: Through the sensors tab of the dashboard.

Step 1: Open the sensors tab of the dashboard you want to add the sensor parameter(s) to.

Step 2: Click on the + icon located in the center of your page. This icon will be in the lower right corner of your page if you already have any sensor parameter added to this tab. A side window will open.

Step 3: The side window allows you to manage the parameters of the sensors you want to set as favourite. Select the sensor parameter(s) you want to add to the sensors tab of your dashboard.

Use the search bar located at the top of the side window to find your desired sensor more easily. Search by sensor name or location.

Step 4: Click Save.

Example of the procedure:

NOTE: You can add up to 100 sensor parameters to the Sensors tab of your Dashboard.